|Display||Blue Backlit LCD Display for Both Day and Night|
|Working Models||Beep/Vibration/Static Stimulation|
|Vibration Levels||0-100 Levels|
|Static Stimulation Levels||0-100 Levels|
|Minimum Collar Size||30cm/11.8''|
|Maximal Collar Size||60cm/23.6''|
|Charging Time||3-4 hours|
|Working Time||2 Weeking (using few hours a day)|
|Screws Quantity||4pcs: 2 small pcs, 2 large pcs|
|Power By||USB Charge Cable|
1.Three channels: Choose channel for max 3 receivers with one remote. (single receiver is coming soon)
2.Four training modes: Shock/Vibration/Light/Sound.
3.Auto power saves: The remote and receiver will go into standby mode if no operations within 5 minutes.
4.Stable levels: You could adjust the level of vibration mode and shock mode from 1 to 100.
5.Y-type USB cable: Remote and receiver can be charged at the same time.
6.100% waterproof receiver, the dog can swim or walk in the rain with it.
7.LCD screen and blue backlit show the modes, levels, and channels in the dark, avoiding the wrong operations.
8.Two size screw: The collar length is 27.5in, and it can be adjusted to fit small, medium, large dogs, and puppies, 15lbs or larger.
How to pair Remote and Receiver?
1.Press the shock button or vibration button to turn on the remote.
2.Choose a channel 1 or 2 or 3 by press the 1/3 button
3.Press the vibration button, adjust the level by press up/down button, make sure the level above 001.
4.Press the power button on the receiver, you hear a Beep sound, and the power light is on.
5.Press the vibration button within 10s after the Beep sound, you can hear a Beep again, that means the pairing successful.
6.If you have 2 or 3 receivers, just choose the different channel and pair as above same steps. (Single receiver is coming soon)
Package Includes ：
1 x Digoo DG-PPT1 Waterproof Receiver (Collar)